5 Tips On How To Choose The Right Type Of Swimming Pool Filter

0
Swimming-Pool-Filter

Our swimming pools need to be kept always clean. But then, how can this be achieved? This is by the use of pool filters. They are the most important parts of our pools; they are what keep our swimming pools clean. Without them, never expect to have a clear pool at any time. A pool that isn’t clean is identified by being cloudy and green. The filters are responsible for taking off fine particles from the water as the water is kept flowing consistently preventing it from being stagnant.

For all this to go the right way possible, choosing the correct filter is important. Without knowing what you need while out in the market, you will actually get yourself falling at bringing home something that is not ideal for you. Before deciding to go shopping, you need to first know every detail of your swimming pool, this is what will be guiding you while checking on the one you need. Here are steps to follow in this.

Find the volume of water your pool holds and it’s the surface area

You will find different pools with different shapes, but then, the common pools are round and rectangular in shape. Depending on the shape you own, it is important you correctly calculate the size of the pool using the right mathematical formulas. It will also be well to measure the surface area of your pool yourself, but then if in case you had purchased it, the measurements obvious should have been provided to you by the seller upon purchase.

Find out the maximum volume of water of your pool

After you have done this, you will make use of the volume of the pool to identify the amount of water that moves through the pool filter in every minute. This is actually what is referred to as the flow rate. The rate normally differs from one pool to the other. This need to be calculated having in mind that you are after purchasing the filter that will work best with your pool to maintain it clean. Also what you should consider is purchasing a pool filter that is slightly oversized for the pool you own; this will ensure there is maximum efficiency.

In case you find that the flow rate exceeds and that this operation turns to pressurize the filter too much, all you need to consider is increasing the size of the pipe of your plumbing system in whole or part of it. This will in turn help to reduce the system operating pressure.

Actually, all filters you will find out there have a maximum and minimum rate of flow that the pump that needs to be falling within. The filter will not at all function properly if it’s too weak or there happens to be too much flow. Ensure you choose a pool that accommodates well the amount of water your pool holds.

Find out the turnover rate of the pool

What does this mean? You need actually to know the time it takes for the water in the pool to cycle completely through the pool filter. Out there, most municipal health codes normally need a minimum turnover filtration rate of two complete water turnovers in a period of 24 hours. The turnover rate termed as the minimum is the one that makes to turn over the whole swimming pool in a period of 12 hours one complete cycle. The typical sizing rates for swimming pools these days are about 8 to 10 hours.

For swimming pools for semi-commercial, commercial or experiencing high turnover application, then it is important to buy a filter that is capable to turn over all water in the pool at least every 24 hours complete four cycles.

Choose the right filter

A factor that is more dependable when choosing the right pool filter is the size of your pool. There is a need to run the pump each and every day to ensure water clarity of your pool is maintained. This ensures that the water is completely turned over. The turnover rate and designing rate of all filters is at a gallon per 60 seconds.

Consider the amount of water resistance that brings an effect on the Polaris turnover rate

There will actually be more resistance when water will tend to move faster through the pump. Opt for a pool filter that will turn your pool in a period of 10 hours as the minimum turnover rate. Going for bigger filters is good for filters as large filter areas actually help to maintain the clarity of your pool water.

Also, you need to remember that the faster the water velocity that moves through the system, the great forces of resistance of water flow will be experienced. What does this mean? A slower pump like for instance the one with a speed of the 2-speed pump will be having a flow increase on lower speeds per unit of power as compared to those with high speeds.

Use all the gathered information from the swimming pool to make the right filter purchase of your pool. You will not at all experience any problems when you use a simple equation when doing this. Before you place everything together, ensure that you have calculated the volume of the pool correctly in gallons and try to make a decision on a turnover rate that is reasonable for all water that the filter will be cycling.

It can be something important to the lives of our loved ones and us too by maintaining the cleanliness of our pools. This is why you need to go for the right pool filter to help you perform all these so that you will always remain to enjoy your swimming pool always. Out of the filter options, you will find in the market, you need to consider the one that is the best fit for your pool and also the one that favors your budget. A pool filter is among the great investments and actually the most useful and easiest way of keeping our swimming pools clean.

SHARE
Healthicu is a digital health magazine dedicated towards your Health, Beauty and Fitness concerns. We bring the latest information for your health problems, natural remedies and tips to improve your health and overall fitness.